Skip to content

Practice problems

Inductor practice problems

An inductor is a coil of wire that stores energy in a magnetic field and opposes any change in its current. These ten problems use V = L × ΔI ÷ Δt to find an inductor's voltage, then the energy it stores, how inductors combine and how fast you can switch one off before the inductive kickback gets too large. Type your answer to check it, and open the working whenever you want it.

The method

V = L × ΔI over Δt
E = ½ × L × I²
  • Work in henries, amps and seconds: 10 mH = 0.01 H, 50 µs = 0.00005 s
  • A steady current induces no voltage. Only a changing current does
  • Series: add them, L = L1 + L2
  • Parallel: product over sum, L1 × L2 over L1 + L2, like resistors

The problems

Type your answer and tap Check. Every one has the working, step by step.

  1. Problem 1 of 10

    The current in a 10 mH inductor rises steadily by 0.5 A in 2 ms. What voltage is across it?

    Show the working
    1. Use V = L × ΔI over Δt in henries, amps and seconds: 10 mH = 0.01 H and 2 ms = 0.002 s.
    2. V = 0.01 H × 0.5 A over 0.002 s = 0.01 × 250 = 2.5 V

    Answer: 2.5 V

  2. Problem 2 of 10

    A 47 mH inductor's current rises steadily from 0 to 100 mA in 50 µs. What voltage must be across it?

    Show the working
    1. In base units: 47 mH = 0.047 H, 100 mA = 0.1 A and 50 µs = 0.00005 s.
    2. ΔI over Δt = 0.1 A over 0.00005 s = 2000 A per second.
    3. V = 0.047 H × 2000 = 94 V

    Answer: 94 V

  3. Problem 3 of 10

    How much energy is stored in a 22 mH inductor carrying 3 A, in millijoules?

    Show the working
    1. E = ½ × L × I², with 22 mH = 0.022 H.
    2. E = 0.5 × 0.022 H × (3 A)² = 0.5 × 0.022 × 9 = 0.099 J, which is 99 mJ.

    Answer: 99 mJ

  4. Problem 4 of 10

    A 1 mH inductor carries 500 mA. How much energy is in its magnetic field, in microjoules?

    Show the working
    1. E = ½ × L × I² = 0.5 × 0.001 H × (0.5 A)²
    2. E = 0.5 × 0.001 × 0.25 = 0.000125 J, which is 125 µJ.

    Answer: 125 µJ

  5. Problem 5 of 10

    10 mH, 22 mH and 4.7 mH inductors are wired in series, with no mutual coupling between them. What is the total inductance?

    Show the working
    1. Inductors in series add, just like resistors.
    2. L = 10 mH + 22 mH + 4.7 mH = 36.7 mH

    Answer: 36.7 mH

  6. Problem 6 of 10

    A 10 mH and a 15 mH inductor are wired in parallel, with no mutual coupling between them. What is the total inductance?

    Show the working
    1. Inductors in parallel combine like resistors in parallel: product over sum, for two.
    2. L = 10 × 15 over 10 + 15 mH = 150 over 25 mH = 6 mH

    Answer: 6 mH

  7. Problem 7 of 10

    12 V across an inductor makes its current rise at 400 A per second. What is its inductance, in millihenries?

    Show the working
    1. Rearrange V = L × ΔI over Δt: L = V over ΔI ÷ Δt.
    2. L = 12 V over 400 A/s = 0.03 H, which is 30 mH.

    Answer: 30 mH

  8. Problem 8 of 10

    A relay coil carries 220 mA when its transistor switches off. A 470 Ω resistor is connected in parallel with the coil. What is the peak voltage across the coil at that moment?

    Show the working
    1. The current in an inductor can't change instantly, so at switch-off its 220 mA continues through the 470 Ω resistor.
    2. V = I × R = 0.22 A × 470 Ω = 103.4 V ≈ 103 V. Without the resistor it would be far higher, which is why a flyback diode is the usual fix.

    Answer: 103 V

  9. Problem 9 of 10

    Stretch: a 100 mH inductor carries 150 mA. You want the voltage at switch-off to stay under 60 V. What is the shortest time in which the current can be ramped steadily to zero, in microseconds?

    Show the working
    1. Rearrange V = L × ΔI over Δt for the time: Δt = L × ΔI over V.
    2. Δt = 0.1 H × 0.15 A over 60 V = 0.015 over 60 s = 0.00025 s
    3. 0.00025 s is 250 µs. Any faster and the voltage exceeds 60 V.

    Answer: 250 µs

  10. Problem 10 of 10

    Stretch: a 220 µH inductor in a power supply must store 1 mJ. What current does it need to carry?

    Show the working
    1. Rearrange E = ½ × L × I²: I = √(2E over L).
    2. 2E over L = 2 × 0.001 J over 0.00022 H ≈ 9.09
    3. I = √9.09 ≈ 3.02 A

    Answer: 3.02 A

Build it in a free lesson

“Inductors” is lesson 4 of 5 in Capacitor Caves, Electronics World 3. Free with an account. Lessons unlock in order, so you’ll do the 18 before it first.

Free lesson

Now build it yourself

Each lesson comes in three short parts: see the idea, try it on a live board, then build it yourself, with quick checks as you go.

Try it yourself: free lesson

“Inductors” is lesson 4 of 5 in Capacitor Caves, Electronics World 3. Free with an account. Lessons unlock in order, so you’ll do the 18 before it first.

Or start from the very first lesson, no account needed

Check it with a calculator

The ideas behind it

Questions people ask

Does an inductor block DC?

No, a capacitor does that. A steady DC current flows through an inductor as if it were a length of wire, and the only voltage across it is I × R from the winding's DC resistance. An inductor opposes changes in current: the faster the change, the larger the voltage, V = L × ΔI ÷ Δt.

Why does an inductor produce a voltage spike when switched off?

Its current can't stop instantly. Interrupt it in a few microseconds and ΔI ÷ Δt is very large, so the voltage is very large: hundreds or thousands of volts. This is called inductive kickback. A flyback diode or resistor in parallel with the coil gives the current a path, which limits the spike.

Do inductors in series add like capacitors or like resistors?

Like resistors: in series they add, and in parallel they combine as 1 ÷ L = 1 ÷ L1 + 1 ÷ L2. That holds when there is no mutual inductance between them. Coils wound close together are magnetically coupled, and then the totals change.

More practice