Practice problems
Impedance practice problems for RC and RL circuits
Impedance is a circuit's total opposition to AC: resistance and reactance combined, in ohms. These ten problems find the impedance of a resistor in series with a capacitor or an inductor, the phase angle between current and voltage, the current that flows and the voltage across each component. Type your answer to check it, and open the working whenever you want it.
The method
- Find the reactance first if you're given a part and a frequency: XC = 1 over 2π f C, XL = 2π f L
- I = V over |Z|, then each component's voltage is I × R or I × X
- φ is the phase angle between the current and the source voltage: the current leads with a capacitor and lags with an inductor
- Use RMS with RMS, or peak with peak
The problems
Type your answer and tap Check. Every one has the working, step by step.
Problem 1 of 10
A 300 Ω resistor is in series with a capacitor whose reactance is 400 Ω. What is the circuit's impedance?
Show the working
- The voltages across R and X are 90° out of phase, so R and X add like the sides of a right-angled triangle (the impedance triangle): |Z| = √(R² + X²).
- |Z| = √(300² + 400²) = √(90,000 + 160,000) = √250,000 = 500 Ω
Answer: 500 Ω
Problem 2 of 10
A 1 kΩ resistor is in series with a coil whose reactance is also 1 kΩ. What is the impedance, in kilohms?
Show the working
- |Z| = √(R² + XL²) = √(1² + 1²) kΩ = √2 kΩ
- |Z| ≈ 1.41 kΩ: more than either component, less than the 2 kΩ you'd get by adding.
Answer: 1.41 kΩ
Problem 3 of 10
10 V RMS drives a 1.2 kΩ resistor in series with a capacitor of reactance 1.6 kΩ. What RMS current flows, in milliamps?
Show the working
- |Z| = √(1.2² + 1.6²) kΩ = √(1.44 + 2.56) kΩ = √4 kΩ = 2 kΩ
- I = V over |Z| = 10 V over 2 kΩ = 5 mA
Answer: 5 mA
Problem 4 of 10
A 1 kΩ resistor is in series with a coil of reactance 1 kΩ. By how many degrees does the current lag the source voltage?
Show the working
- The phase angle is φ = tan⁻¹(X over R).
- φ = tan⁻¹(1 kΩ over 1 kΩ) = tan⁻¹(1) = 45°. With a coil, the current lags.
Answer: 45°
Problem 5 of 10
A 2.2 kΩ resistor is in series with a capacitor of reactance 1 kΩ. By how many degrees does the current lead the source voltage?
Show the working
- φ = tan⁻¹(XC over R) = tan⁻¹(1 kΩ over 2.2 kΩ) = tan⁻¹(0.455)
- φ ≈ 24.4°. R is larger than XC, so the circuit is closer to a purely resistive 0° than to 90°.
Answer: 24.4°
Problem 6 of 10
A 1 kΩ resistor is in series with a 100 nF capacitor at 1 kHz. What is the impedance, in kilohms?
Show the working
- First the reactance: XC = 1 over 2π f C = 1 over 2π × 1000 × 10⁻⁷ ≈ 1592 Ω.
- |Z| = √(1000² + 1592²) Ω ≈ 1880 Ω, which is 1.88 kΩ.
Answer: 1.88 kΩ
Problem 7 of 10
5 V RMS at 2 kHz drives a 100 Ω resistor in series with a 10 mH coil. What RMS current flows, in milliamps?
Show the working
- XL = 2π f L = 2π × 2000 × 0.01 ≈ 125.7 Ω
- |Z| = √(100² + 125.7²) Ω ≈ 160.6 Ω
- I = 5 V over 160.6 Ω ≈ 0.0311 A, which is 31.1 mA.
Answer: 31.1 mA
Problem 8 of 10
12 V RMS drives a 3.3 kΩ resistor in series with a capacitor of reactance 5.6 kΩ. What RMS voltage is across the resistor?
Show the working
- |Z| = √(3.3² + 5.6²) kΩ = √42.25 kΩ = 6.5 kΩ
- I = 12 V over 6.5 kΩ ≈ 1.846 mA
- VR = 1.846 mA × 3.3 kΩ ≈ 6.09 V. The capacitor gets 1.846 mA × 5.6 kΩ ≈ 10.3 V, and the two don't add to 12 V because they are 90° out of phase: √(6.09² + 10.3²) ≈ 12 V.
Answer: 6.09 V
Problem 9 of 10
Stretch: 9 V RMS drives a resistor in series with a capacitor of reactance 2.4 kΩ. You want exactly 3 mA RMS. What resistor do you need, in kilohms?
Show the working
- The impedance must be |Z| = 9 V over 3 mA = 3 kΩ.
- Rearrange the impedance triangle: R = √(|Z|² − X²) = √(3² − 2.4²) kΩ = √(9 − 5.76) kΩ = √3.24 kΩ
- R = 1.8 kΩ
Answer: 1.8 kΩ
Problem 10 of 10
Stretch: a 1 kΩ resistor is in series with a 100 nF capacitor. At what frequency is the phase angle exactly 45°, in kilohertz?
Show the working
- 45° means tan⁻¹(XC over R) = 45°, so XC = R = 1000 Ω.
- 1 over 2π f C = R, so f = 1 over 2π R C = 1 over 2π × 1000 × 10⁻⁷
- f ≈ 1592 Hz, which is 1.59 kHz: the RC filter's cutoff frequency.
Answer: 1.59 kHz
“Impedance and phase” is lesson 3 of 6 in Oscillation Coast, Electronics World 4. Free with an account. Lessons unlock in order, so you’ll do the 23 before it first.
Free lesson
Now build it yourself
Each lesson comes in three short parts: see the idea, try it on a live board, then build it yourself, with quick checks as you go.
“Impedance and phase” is lesson 3 of 6 in Oscillation Coast, Electronics World 4. Free with an account. Lessons unlock in order, so you’ll do the 23 before it first.
Or start from the very first lesson, no account neededCheck it with a calculator
The ideas behind it
- What is impedance?Resistance and reactance combined: why 3 kΩ and 4 kΩ make 5 kΩ, and what phase means.
- Capacitive and inductive reactance explainedWhy a capacitor passes treble and an inductor passes bass: X_C, X_L and Ohm's law for AC.
- How an RC circuit shifts phase, and how to get 90°An RC stage makes its output trail the input: 45° at the corner, and never quite 90°.
Questions people ask
What is impedance?
Impedance, Z, is a circuit's total opposition to AC, in ohms. It combines resistance R, which dissipates power, with reactance X from capacitors and inductors, which stores energy and returns it to the source. For R and X in series, |Z| = √(R² + X²), and Ohm's law becomes I = V ÷ |Z|.
Why can't I just add resistance and reactance?
A resistor's voltage is in phase with the current, and a capacitor's or inductor's is 90° out of phase. Their peaks never line up, so they add like the sides of a right-angled triangle. 3 kΩ and 4 kΩ make 5 kΩ, not 7 kΩ.
Does the current lead or lag in an RC circuit?
In a series RC circuit the current leads the source voltage, by φ = tan⁻¹(X_C ÷ R). In a series RL circuit it lags, by tan⁻¹(X_L ÷ R). When R and X are equal, the angle is 45°.
More practice
- Ohm's law practice problemsFind V, I or R, then the power, with the working for each.
- Units and prefixes practice problemsConvert mA, kΩ, µF, nF, pF, ms and mV, with the working for each.
- LED resistor practice problemsSize the resistor for one LED or a string, round to a standard value, check the power.
- Electrical power practice problemsPower three ways, energy in kWh, battery life and running costs, all worked.
- Series and parallel resistors practice problemsTotals in series and parallel, mixed networks and branch currents, all worked.
- Kirchhoff's laws practice problemsBalance currents at a junction and voltages round a loop, with the working for each.
- Voltage divider practice problemsFind Vout, pick R2 for a target and work out loading, with the working for each.
- Thevenin and Norton equivalent practice problemsReduce a network to V_th in series with R_th, then load it, with the working.
- Capacitor practice problemsCharge, capacitance, series and parallel, and stored energy, with the working.
- RC time constant practice problemsτ = R × C, the 63% rule, charging and discharging, with the working.
- Inductor practice problemsV = L × ΔI ÷ Δt, stored energy and inductors in series and parallel, with the working.
- RL circuit time constant practice problemsτ = L ÷ R, the current's rise and decay, and inductive kickback, with the working.
- AC voltage and transformer practice problemsPeak, RMS, period, AC power and transformer turns ratios, with the working.
- Capacitive and inductive reactance practice problemsCapacitive and inductive reactance, AC current and impedance, with the working.
- RC filter practice problemsCutoff frequency, choosing R or C, and the output either side of the cutoff, with the working.
- Decibel practice problemsRatios to dB and back, for power and voltage, gains that add and the −3 dB point.
- LC resonance practice problemsf₀ = 1 ÷ (2π√(LC)), tuning for a frequency, and scaling, with the working.
- Diode practice problemsForward voltage, series resistor current, diodes in series, reverse bias and power dissipation.
- Rectifier and ripple practice problemsPeak output, ripple and the smoothing capacitor for half-wave and bridge rectifiers.
- Zener diode practice problemsSize a Zener regulator's resistor, split its current and check the Zener's power.
- Transistor switch practice problemsBase current, base resistor and load current for a BJT switch, then a MOSFET.
- MOSFET switch practice problemsConduction loss from R_DS(on), gate and pull-down currents, flyback diodes and junction temperature.
- Op-amp gain practice problemsInverting and non-inverting gain, the output, the resistor to pick and when it clips.
- Inverting and summing amplifier practice problemsInverting gain, input resistance, summing amps, averaging, a simple DAC and clipping.
- Schmitt trigger and hysteresis practice problemsHysteresis band, both thresholds and the feedback resistor for a comparator.
- Op-amp limits practice problemsGain-bandwidth, slew rate, output swing and input offset, with the working.
- Binary and hex practice problemsBinary to decimal and back, bits needed, the largest n-bit number and hex.
- Logic gates practice problemsGate outputs, truth-table rows, Boolean expressions and fewer gates, with the working.
- Counters and flip-flops practice problemsTop count, flip-flops needed, frequency division, rollover and ripple delay.
- PWM and duty cycle practice problemsDuty cycle, average voltage, on-time, analogWrite 0–255 and power, with the working.
- ADC and analog input practice problemsanalogRead to volts and back, resolution, dividers and 12-bit ADCs, with the working.